Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May  7 04:15:57 UTC 2006
    root@bloom.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
ACPI APIC Table: <PTLTD  	 APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 254 (2814.44-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f51  Stepping = 1
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
  AMD Features2=0x1<LAHF>
real memory  = 5368709120 (5120 MB)
avail memory = 4114546688 (3923 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xc8000000-0xc8000fff irq 20 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
pci0: <multimedia, audio> at device 4.0 (no driver attached)
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1c00-0x1c0f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x1c40-0x1c47,0x1c34-0x1c37,0x1c38-0x1c3f,0x1c30-0x1c33,0x1c10-0x1c1f mem 0xc8002000-0xc8002fff irq 22 at device 7.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce CK804 SATA300 controller> port 0x1c58-0x1c5f,0x1c4c-0x1c4f,0x1c50-0x1c57,0x1c48-0x1c4b,0x1c20-0x1c2f mem 0xc8003000-0xc8003fff irq 23 at device 8.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xc8104000-0xc81047ff,0xc8100000-0xc8103fff irq 16 at device 7.0 on pci1
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 08:00:20:14:40:01:07:76
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 0a:00:20:01:07:76
fwe0: Ethernet address: 0a:00:20:01:07:76
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0x1c60-0x1c67 mem 0xc8004000-0xc8004fff irq 20 at device 10.0 on pci0
nve0: Ethernet address 00:14:4f:24:05:f4
miibus0: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve0: Ethernet address: 00:14:4f:24:05:f4
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <display, VGA> at device 0.0 (no driver attached)
pcib4: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci128: <ACPI PCI bus> on pcib4
pci128: <memory> at device 0.0 (no driver attached)
pci128: <memory> at device 1.0 (no driver attached)
atapci3: <nVidia nForce CK804 SATA300 controller> port 0x2030-0x2037,0x2024-0x2027,0x2028-0x202f,0x2020-0x2023,0x2000-0x200f mem 0xd8001000-0xd8001fff irq 44 at device 7.0 on pci128
ata6: <ATA channel 0> on atapci3
ata7: <ATA channel 1> on atapci3
atapci4: <nVidia nForce CK804 SATA300 controller> port 0x2048-0x204f,0x203c-0x203f,0x2040-0x2047,0x2038-0x203b,0x2010-0x201f mem 0xd8002000-0xd8002fff irq 45 at device 8.0 on pci128
ata8: <ATA channel 0> on atapci4
ata9: <ATA channel 1> on atapci4
nve1: <NVIDIA nForce MCP9 Networking Adapter> port 0x2050-0x2057 mem 0xd8003000-0xd8003fff irq 46 at device 10.0 on pci128
nve1: Ethernet address 00:14:4f:24:05:f5
miibus1: <MII bus> on nve1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve1: Ethernet address: 00:14:4f:24:05:f5
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci128
pci129: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci128
pci130: <ACPI PCI bus> on pcib6
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xd4000-0xd57ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub1: vendor 0x03eb Standard USB Hub, class 9/0, rev 1.10/3.00, addr 2
uhub1: 4 ports with 4 removable, self powered
uhub2: vendor 0x0424 product 0x2502, class 9/0, rev 2.00/0.01, addr 3
uhub2: 2 ports with 2 removable, self powered
uhub3: vendor 0x0430 product 0x100e, class 9/0, rev 2.00/1.03, addr 4
uhub3: 4 ports with 3 removable, bus powered
ums0: vendor 0x1267 PS/2+USB Mouse, rev 1.10/51.15, addr 5, iclass 3/1
ums0: 3 buttons and Z dir.
ukbd0: vendor 0x0430 Sun USB Keyboard, rev 2.00/1.03, addr 6, iclass 3/1
kbd0 at ukbd0
Timecounters tick every 1.000 msec
module_register_init: MOD_LOAD (amr_linux, 0xffffffff8062a040, 0) error 6
acd0: DVDR <MATSHITADVD-RAM UJ-845S/D100> at ata0-master UDMA33
ad4: 238471MB <HITACHI HDS7225SBSUN250G 0548N5E9BE V44OA94A> at ata2-master SATA300
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s3a